PRODUCT SELECTION
Fast recovery bridge rectifiers
Single-phase fast recovery bridges in surface-mount and through-hole packages. Typical and maximum reverse recovery times are listed separately; a blank maximum means the datasheet does not specify it in the maximum column. Check load, temperature and heatsink conditions when comparing current ratings.
Product selector
Fast recovery bridge rectifiers
Select 2–4 products in this category to compare.
Part number, package and datasheet columns always remain visible.
Choose columns
5 products found
Scroll horizontally to view all parameters and conditions.
| COMPARE | PART NUMBER | PACKAGE | Repetitive peak reverse voltage(V) | Average rectified output current(A) | Non-repetitive surge current(A) | Reverse recovery time (trr), max(ns) | Reverse recovery time (trr), typ(ns) | Forward voltage per diode(V) | DATASHEET |
|---|---|---|---|---|---|---|---|---|---|
| RHBL15M Fast recovery bridge rectifiers | HBL | 1000MaximumConditionsMaximum repetitive peak reverse voltage; TA = 25 °C unless otherwise specified. | 15MaximumConditionsTA = 25 °C unless otherwise specified in the rating table; see the TC derating curve on p. 2 and thermal conditions. Single-phase, half-wave, 60 Hz, resistive or inductive load; derate current by 20% for a capacitive load. | 320MaximumConditions8.3 ms single half sine-wave superimposed on rated load; TA = 25 °C unless otherwise specified. See the p. 2 surge curve. | 500MaximumConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 200TypicalConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 1.3MaximumConditionsPer diode; IF = 7.5 A; TA = 25 °C. Pulse test: 300 µs pulse width, 1% duty cycle. | ||
| RGBU406 Fast recovery bridge rectifiers | GBU | 600MaximumConditionsMaximum repetitive peak reverse voltage; TA = 25 °C unless otherwise specified. | 4MaximumConditionsWith heatsink at 100 °C; TC identified in the p. 2 derating curve. Note 2: device mounted on a 250 mm × 250 mm × 2.0 mm aluminum plate heatsink. Single-phase, half-wave, 60 Hz, resistive or inductive load; derate current by 20% for a capacitive load. | 135MaximumConditions8.3 ms single half sine-wave superimposed on rated load; TA = 25 °C unless otherwise specified. See the p. 2 surge curve. | 350MaximumConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 220TypicalConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 0.98MaximumConditionsPer diode; IF = 4 A; TA = 25 °C. Pulse test: 300 µs pulse width, 1% duty cycle. | ||
| RGBJ2510 Fast recovery bridge rectifiers | GBJ | 1000MaximumConditionsMaximum repetitive peak reverse voltage; TA = 25 °C unless otherwise specified. | 25MaximumConditionsWith heatsink at 100 °C; TC identified in the p. 2 derating curve. Refer to the datasheet thermal and mounting conditions. Single-phase, half-wave, 60 Hz, resistive or inductive load; derate current by 20% for a capacitive load. | 300MaximumConditions8.3 ms single half sine-wave superimposed on rated load; TA = 25 °C unless otherwise specified. See the p. 2 surge curve. | — | 200TypicalConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. Listed in the Typ. column; the Max. column is blank. | 1.1MaximumConditionsPer diode; IF = 12.5 A; TA = 25 °C. Pulse test: 300 µs pulse width, 1% duty cycle. | ||
| RB307S Fast recovery bridge rectifiers | DBS | 1000MaximumConditionsMaximum repetitive peak reverse voltage; TA = 25 °C unless otherwise specified. | 3MaximumConditionsTC = 100 °C, as specified in the current-rating row; see the datasheet mounting and derating information. Single-phase, half-wave, 60 Hz, resistive or inductive load; derate current by 20% for a capacitive load. | 85MaximumConditions8.3 ms single half sine-wave superimposed on rated load; TA = 25 °C unless otherwise specified. See the p. 2 surge curve. | 500MaximumConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | — | 1.25MaximumConditionsPer diode; IF = 3 A; TA = 25 °C. Pulse test: 300 µs pulse width, 1% duty cycle. | ||
| RABS10 Fast recovery bridge rectifiers | ABS | 1000MaximumConditionsMaximum repetitive peak reverse voltage; TA = 25 °C unless otherwise specified. | 1MaximumConditionsTA = 25 °C unless otherwise specified. Note 2: device mounted on a 250 mm × 250 mm × 2.0 mm aluminum plate heatsink. Single-phase, half-wave, 60 Hz, resistive or inductive load; derate current by 20% for a capacitive load. | 30MaximumConditions8.3 ms single half sine-wave superimposed on rated load; TA = 25 °C unless otherwise specified. See the p. 2 surge curve. | 500MaximumConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 200TypicalConditionsIF = 0.5 A; IR = 1.0 A; IRR = 0.25 A; TA = 25 °C. | 1.3MaximumConditionsPer diode; IF = 1 A; TA = 25 °C. Pulse test: 300 µs pulse width, 1% duty cycle. |
No matching products
Try a shorter part number or reset the filters.